logo.gif (2999 bytes)

See a complete list of Casio PDA batteries

See other PDA batteries: Compaq iPAQ, Sony Clie, Palm Pilot, Toshiba, Casio and more.

CGA-1-105A Battery Installation Guide

 button_order.gif (689 bytes)
The instructions below come with no warranty or guarantee, improper assembly or use of excessive force may result in damage to the parts involved or to your PDA/Mp3 Player. By utilizing these instructions, you agree to hold Laptops For Less blameless and unaccountable for damages or problems caused by use of these instructions. These instruction require a moderate level of technical ability and proficiency in the use of hand tools, as well as a general understanding of electronic components. Buyer assumes full responsibility for the installation of this replacement battery.

 

 Step 1:

Using the included phillips-head screwdriver remove the single screw from the battery case cover located at the back of the PDA. The battery case cover should easily unsnap from the PDA.

 

 Step 2:

Untuck the battery power cables from under the case cover with the tip of the screwdriver. Once the power cables are free, gently pull the power connector out of the power socket.

 

 Step 3:

Once the power cable is disconnected carefully pull on the power cable to remove the battery from the compartment. The battery should easily slide out.

Apply the new battery within the battery compartment. Please pay attention to have the original orientation (power cable towards the bottom of the PDA).

Connect the power cable by positioning it within the socket on the motherboard. You can push the connector into the socket with your finger or with the tip of the screwdriver. Remember to tuck the excess power cable back under the case so that the case cover will fit.

Snap on the cover and put back the single screw.

Your new battery will need a minimum of three hours of charging before first use.