logo.gif (2999 bytes)

See a complete list of Handspring PDA batteries

See other PDA batteries: Compaq iPAQ, Sony Clie, Palm Pilot, Toshiba, Casio and more.

Handspring Visor Battery Installation Guide

 button_order.gif (689 bytes)
The instructions below come with no warranty or guarantee, improper assembly or use of excessive force may result in damage to the parts involved or to your PDA/Mp3 Player. By utilizing these instructions, you agree to hold Laptops For Less blameless and unaccountable for damages or problems caused by use of these instructions. These instruction require a moderate level of technical ability and proficiency in the use of hand tools, as well as a general understanding of electronic components. Buyer assumes full responsibility for the installation of this replacement battery.

 

 Step 1:

Using the included screwdriver, remove the six screws from the back of the case.

 

 Step 2:

With the screws removed, you should be able to easily lift the back case cover from the PDA. Using your fingers, pry the battery free from its compartment. The battery should still be attached by its power cable.

 

 Step 3:

Gently pull on the battery power cable to disconnect it from the power socket. You can now remove the battery.

 

 Step 4:

Please pay attention to the original orientation (power cable towards the top of the PDA). Connect the power cable of the new battery by positioning it within the socket on the motherboard, pushing it in with the tip of a screwdriver. Apply the new battery within the battery compartment.

Snap on the cover and put back the six screws.

Your new battery will need a minimum of three hours of charging before first use.
©1997- 2005 Laptops for Less Inc.
All Rights Reserved. All offers and prices are subject to change without notice.

Back