logo.gif (2999 bytes)

See a complete list of Handspring PDA batteries

See other PDA batteries: Compaq iPAQ, Sony Clie, Palm Pilot, Toshiba, Casio and more.

Handspring Treo 270 and 300 Battery Installation Guide

 button_order.gif (689 bytes)
The instructions below come with no warranty or guarantee, improper assembly or use of excessive force may result in damage to the parts involved or to your PDA/Mp3 Player. By utilizing these instructions, you agree to hold Laptops For Less blameless and unaccountable for damages or problems caused by use of these instructions. These instruction require a moderate level of technical ability and proficiency in the use of hand tools, as well as a general understanding of electronic components. Buyer assumes full responsibility for the installation of this replacement battery.

 handspring battery

 Step 1:

Using the included screwdriver, remove the four screws from the case. Using your fingers, pry open the case starting with one of the bottom corners of the PDA. The back of the case should easily unsnap from the rest of the PDA.

 handspring battery installation

 Step 2:

Using your fingers, pry open the case starting with one of the bottom corners of the PDA. The back of the case should unsnap from the rest of the PDA, but will still be attached by the battery power cord.

 

 handspring battery installation

 Step 3:

Once the case is separated, you will have easy access to the battery and the power cable. The battery is secured by a small amount of glue. Gently pulling on the battery should free it from the PDA.

 handspring batteries installation

 Step 4:

Disconnect the battery connector by gently pulling on the black and red power cable.

Please pay attention to have the original orientation (power cable towards the power connector). Connect the power cable of the new battery by positioning it within the socket on the motherboard, pushing it in. Apply the new battery within the guide brackets...it should stick to the original glue spots.

Snap on the cover and put back the four screws.

Your new battery will need a minimum of three hours of charging before first use.
©1997- 2005 Laptops for Less Inc.
All Rights Reserved. All offers and prices are subject to change without notice.

Back